NETBOTZ-MIB: NetBotz BotzWare

This Management Information Base module contains information relating to the vendor's NetBotz SNMP object elements.

 iso (1)
 org (3)
 dod (6)
 internet (1)
 private (4)
 enterprises (1)
 
 netBotz (5528)
 netBotz-reg (10)
 netBotz-generic (20)
 netBotz-products (30)
 netBotz-prd-bot (10)
 netBotz-prd-bot-temp (1)
 netBotz-prd-bot-humidity (2)
 netBotz-prd-bot-airflow (3)
 netBotz-prd-bot-audio (4)
 netBotz-prd-bot-doorajar (5)
 netBotz-prd-bot-temp-min (6)
 netBotz-prd-bot-temp-max (7)
 netBotz-prd-bot-humidity-min (8)
 netBotz-prd-bot-humidity-max (9)
 netBotz-prd-bot-airflow-mins (10)
 netBotz-prd-bot-audio-secs (11)
 netBotz-prd-bot-temp-enabled (12)
 netBotz-prd-bot-hum-enabled (13)
 netBotz-prd-bot-air-enabled (14)
 netBotz-prd-bot-audio-enabled (15)
 netBotz-prd-bot-switch-state (16)
 netBotz-prd-bot-switch-enabled (17)
 netBotz-prd-bot-audio-level (18)
 netBotz-prd-bot-trap-index (20)
 netBotz-prd-bot-trap-address (21)
 netBotz-prd-bot-trap-oid (22)
 netBotz-prd-bot-trap-value (23)
 netBotz-prd-bot-trap-date (24)
 netBotz-prd-bot-refresh (26)
 netBotz-prd-bot-airflow-level (27)
 netBotz-prd-bot-doorpic-count (28)
 netBotz-prd-bot-amps1 (29)
 netBotz-prd-bot-amps1-enabled (30)
 netBotz-prd-bot-amps1-min (31)
 netBotz-prd-bot-amps1-max (32)
 netBotz-prd-bot-amps2 (34)
 netBotz-prd-bot-amps2-enabled (35)
 netBotz-prd-bot-amps2-min (36)
 netBotz-prd-bot-amps2-max (37)
 netBotz-prd-bot-amps3 (39)
 netBotz-prd-bot-amps3-enabled (40)
 netBotz-prd-bot-amps3-min (41)
 netBotz-prd-bot-amps3-max (42)
 netBotz-prd-bot-amps-total (44)
 netBotz-prd-bot-amps-total-enabled (45)
 netBotz-prd-bot-amps-total-min (46)
 netBotz-prd-bot-amps-total-max (47)
 netBotz-prd-bot-amps-total-support-enabled (48)
 netBotz-prd-bot-amps1-uV-per-10mA (49)
 netBotz-prd-bot-amps2-uV-per-10mA (50)
 netBotz-prd-bot-amps3-uV-per-mA (51)
 netBotz-prd-bot-amps1-max-range (52)
 netBotz-prd-bot-amps2-max-range (53)
 netBotz-prd-bot-amps3-max-range (54)
 netBotz-prd-bot-amps4 (55)
 netBotz-prd-bot-amps4-enabled (56)
 netBotz-prd-bot-amps4-min (57)
 netBotz-prd-bot-amps4-max (58)
 netBotz-prd-bot-amps4-uV-per-10mA (60)
 netBotz-prd-bot-amps4-max-range (61)
 netBotz-prd-bot-ext-temp1 (62)
 netBotz-prd-bot-ext-temp2 (63)
 netBotz-prd-bot-ext-temp3 (64)
 netBotz-prd-bot-ext-temp1-enabled (66)
 netBotz-prd-bot-ext-temp1-min (67)
 netBotz-prd-bot-ext-temp1-max (68)
 netBotz-prd-bot-ext-temp2-enabled (69)
 netBotz-prd-bot-ext-temp2-min (70)
 netBotz-prd-bot-ext-temp2-max (71)
 netBotz-prd-bot-ext-temp3-enabled (72)
 netBotz-prd-bot-ext-temp3-min (73)
 netBotz-prd-bot-ext-temp3-max (74)
 netBotz-prd-bot-ext-temp1-uV-per-degreeC (78)
 netBotz-prd-bot-ext-temp1-uV-at-0-degreeC (79)
 netBotz-prd-bot-ext-temp1-min-range (80)
 netBotz-prd-bot-ext-temp1-max-range (81)
 netBotz-prd-bot-ext-temp2-uV-per-degreeC (82)
 netBotz-prd-bot-ext-temp2-uV-at-0-degreeC (83)
 netBotz-prd-bot-ext-temp2-min-range (84)
 netBotz-prd-bot-ext-temp2-max-range (85)
 netBotz-prd-bot-ext-temp3-uV-per-degreeC (86)
 netBotz-prd-bot-ext-temp3-uV-at-0-degreeC (87)
 netBotz-prd-bot-ext-temp3-min-range (88)
 netBotz-prd-bot-ext-temp3-max-range (89)
 netBotz-prd-bot-ext-port1-module-id (94)
 netBotz-prd-bot-ext-port1-module-type (95)
 netBotz-prd-bot-ext-port2-module-id (96)
 netBotz-prd-bot-ext-port2-module-type (97)
 netBotz-prd-bot-ext-port3-module-id (98)
 netBotz-prd-bot-ext-port3-module-type (99)
 netBotz-prd-bot-amp1-total-amp-seconds (102)
 netBotz-prd-bot-amp1-total-amp-seconds-since-time (103)
 netBotz-prd-bot-amp2-total-amp-seconds (104)
 netBotz-prd-bot-amp2-total-amp-seconds-since-time (105)
 netBotz-prd-bot-amp3-total-amp-seconds (106)
 netBotz-prd-bot-amp3-total-amp-seconds-since-time (107)
 netBotz-prd-bot-amp4-total-amp-seconds (108)
 netBotz-prd-bot-amp4-total-amp-seconds-since-time (109)
 netBotz-prd-bot-amptotal-total-amp-seconds (110)
 netBotz-prd-bot-amptotal-total-amp-seconds-since-time (111)
 netBotz-prd-bot-ext-dry1 (112)
 netBotz-prd-bot-ext-dry2 (113)
 netBotz-prd-bot-ext-dry3 (114)
 netBotz-prd-bot-ext-dry4 (115)
 netBotz-prd-bot-ext-dry1-alarm-value (116)
 netBotz-prd-bot-ext-dry1-enabled (117)
 netBotz-prd-bot-ext-dry2-alarm-value (118)
 netBotz-prd-bot-ext-dry2-enabled (119)
 netBotz-prd-bot-ext-dry3-alarm-value (120)
 netBotz-prd-bot-ext-dry3-enabled (121)
 netBotz-prd-bot-ext-dry4-alarm-value (122)
 netBotz-prd-bot-ext-dry4-enabled (123)
 netBotz-prd-bot-ext-dry1-label (124)
 netBotz-prd-bot-ext-dry1-open-label (125)
 netBotz-prd-bot-ext-dry1-closed-label (126)
 netBotz-prd-bot-ext-dry1-open-to-close-millis (127)
 netBotz-prd-bot-ext-dry1-close-to-open-millis (128)
 netBotz-prd-bot-ext-dry1-response (129)
 netBotz-prd-bot-ext-dry2-label (130)
 netBotz-prd-bot-ext-dry2-open-label (131)
 netBotz-prd-bot-ext-dry2-closed-label (132)
 netBotz-prd-bot-ext-dry2-open-to-close-millis (133)
 netBotz-prd-bot-ext-dry2-close-to-open-millis (134)
 netBotz-prd-bot-ext-dry2-response (135)
 netBotz-prd-bot-ext-dry3-label (136)
 netBotz-prd-bot-ext-dry3-open-label (137)
 netBotz-prd-bot-ext-dry3-closed-label (138)
 netBotz-prd-bot-ext-dry3-open-to-close-millis (139)
 netBotz-prd-bot-ext-dry3-close-to-open-millis (140)
 netBotz-prd-bot-ext-dry3-response (141)
 netBotz-prd-bot-cam-motion (148)
 netBotz-prd-bot-cam-motion-enabled (149)
 netBotz-prd-bot-cam-motion-sensitivity (150)
 netBotz-prd-bot-cam-motion-delay (151)
 netBotz-prd-bot-camera-event-autocycle (152)
 netBotz-prd-bot-num-pix-before-alarm (153)
 netBotz-prd-bot-delay-before-event-pix (154)
 netBotz-prd-bot-delay-between-event-pix (155)
 netBotz-prd-bot-cam-motion-area-of-motion (156)
 netBotz-prd-bot-cam-pix-for-duration-of-alerts (157)
 netBotz-prd-bot-camera-enabled (158)
 netBotz-prd-bot-camera-is-flipped (159)
 netBotz-prd-bot-camera-brightness (160)
 netBotz-prd-crawlers (20)
 netbotz-crawlers (5528)
 netBotz-prd-crl-mib2 (1)
 netBotz-prd-crl-mib2-ping (3)
 netBotz-prd-crl-mib2-uptime (8)
 netBotz-prd-crl-mib2-snmpstatus (9)
 netBotz-prd-crl-mib2if (2)
 netBotz-prd-crl-mib2if-opstatus (6)
 netBotz-prd-crltrap (21)
 netBotz-prd-crl-trap-index (20)
 netBotz-prd-crl-trap-address (21)
 netBotz-prd-crl-trap-oid (22)
 netBotz-prd-crl-trap-botoid (23)
 netBotz-prd-crl-trap-value (24)
 netBotz-prd-crl-trap-date (25)
 netBotz-prd-crl-trap-attrib (26)
 netBotz-prd-crl-trap-desc (27)
 netBotz-prd-bot-traps (100)
 netBotz-prd-bot-temperature-traps (1)
 netBotz-prd-bot-humidity-traps (2)
 netBotz-prd-bot-airflow-traps (3)
 netBotz-prd-bot-audio-traps (4)
 netBotz-prd-bot-door-traps (5)
 netBotz-prd-bot-amp1-traps (6)
 netBotz-prd-bot-amp2-traps (7)
 netBotz-prd-bot-amp3-traps (8)
 netBotz-prd-bot-amp4-traps (9)
 netBotz-prd-bot-amp-total-traps (10)
 netBotz-prd-bot-ext-temp1-traps (11)
 netBotz-prd-bot-ext-temp2-traps (12)
 netBotz-prd-bot-ext-temp3-traps (13)
 netBotz-prd-bot-ext-temp4-traps (14)
 netBotz-prd-bot-ext-dry1-traps (15)
 netBotz-prd-bot-ext-dry2-traps (16)
 netBotz-prd-bot-ext-dry3-traps (17)
 netBotz-prd-bot-ext-dry4-traps (18)
 netBotz-prd-bot-amp5-traps (19)
 netBotz-prd-bot-amp6-traps (20)
 netBotz-prd-bot-amp7-traps (21)
 netBotz-prd-bot-ext-temp5-traps (22)
 netBotz-prd-bot-ext-temp6-traps (23)
 netBotz-prd-bot-ext-temp7-traps (24)
 netBotz-prd-bot-ext-dry5-traps (25)
 netBotz-prd-bot-ext-dry6-traps (26)
 netBotz-prd-bot-ext-dry7-traps (27)
 netBotz-prd-bot-camera-motion-traps (28)
 netBotz-prd-bot-ext-humi1-traps (29)
 netBotz-prd-bot-ext-humi2-traps (30)
 netBotz-prd-bot-ext-humi3-traps (31)
 netBotz-prd-bot-ext-humi4-traps (32)
 netBotz-prd-bot-ext-humi5-traps (33)
 netBotz-prd-bot-ext-humi6-traps (34)
 netBotz-prd-bot-ext-humi7-traps (35)
 netBotz-prd-WallBotz-300 (1000)
 netBotz-prd-RackBotz-300 (1001)
 netBotz-prd-RackBotz-300U (1002)
 netBotz-prd-WallBotz-400 (1003)
 netBotz-prd-RackBotz-400 (1004)
 netBotz-prd-RackBotz-303 (1006)
 netBotz-prd-WallBotz-310 (1007)
 netBotz-prd-RackBotz-310 (1008)
 netBotz-prd-WallBotz-300B (1009)
 netBotz-prd-WallBotz-300C (1100)
 netBotz-prd-RackBotz-300C (1101)
 netBotz-prd-RackBotz-300UC (1102)
 netBotz-prd-WallBotz-400C (1103)
 netBotz-prd-RackBotz-400C (1104)
 netBotz-prd-RackBotz-303C (1106)
 netBotz-prd-WallBotz-310C (1107)
 netBotz-prd-RackBotz-310C (1108)
 netBotz-prd-WallBotz-300BC (1109)
 netBotz-prd-WallBotz-300E (1200)
 netBotz-prd-RackBotz-300E (1201)
 netBotz-prd-RackBotz-300UE (1202)
 netBotz-prd-WallBotz-400E (1203)
 netBotz-prd-RackBotz-400E (1204)
 netBotz-prd-RackBotz-303E (1206)
 netBotz-prd-WallBotz-310E (1207)
 netBotz-prd-RackBotz-310E (1208)
 netBotz-prd-WallBotz-300BE (1209)
 expPortTable (31)
 expPortEntry (1)
 expPort-module-id (1)
 expPort-module-type (2)
 expPort-label (3)
 expPort-amps (20)
 expPort-total-amp-seconds (21)
 expPort-total-amp-seconds-since-time (22)
 expPort-amps-enabled (23)
 expPort-amps-min (24)
 expPort-amps-max (25)
 expPort-amps-uV-per-10mA (26)
 expPort-amps-max-range (27)
 expPort-ext-temp (40)
 expPort-ext-temp-enabled (41)
 expPort-ext-temp-min (42)
 expPort-ext-temp-max (43)
 expPort-ext-temp-uV-per-degreeC (44)
 expPort-ext-temp-uV-at-0-degreeC (45)
 expPort-ext-temp-min-range (46)
 expPort-ext-temp-max-range (47)
 expPort-ext-dry (60)
 expPort-ext-dry-alarm-value (61)
 expPort-ext-dry-enabled (62)
 expPort-ext-dry-label (63)
 expPort-ext-dry-open-label (64)
 expPort-ext-dry-closed-label (65)
 expPort-ext-dry-open-to-close-millis (66)
 expPort-ext-dry-close-to-open-millis (67)
 expPort-ext-dry-response (68)
 expPort-ext-humi (80)
 expPort-ext-humi-enabled (81)
 expPort-ext-humi-min (82)
 expPort-ext-humi-max (83)
 expPort-ext-humi-uV-per-percent (84)
 expPort-ext-humi-uV-at-0-percent (85)
 expPort-ext-humi-min-range (86)
 expPort-ext-humi-max-range (87)
 netBotz-metric (32)
 netBotz-metric-onboard (10)
 netBotz-metric-onboard-model (1)
 netBotz-metric-onboard-temp (2)
 netBotz-metric-onboard-humidity (3)
 netBotz-metric-onboard-airflow (4)
 netBotz-metric-onboard-audio (5)
 netBotz-metric-onboard-doorajar (6)
 netBotz-metric-onboard-temp-min (7)
 netBotz-metric-onboard-temp-max (8)
 netBotz-metric-onboard-humidity-min (9)
 netBotz-metric-onboard-humidity-max (10)
 netBotz-metric-onboard-airflow-mins (11)
 netBotz-metric-onboard-audio-secs (12)
 netBotz-metric-onboard-switch-state (13)
 netBotz-metric-onboard-audio-level (14)
 netBotz-metric-onboard-airflow-level (15)
 netBotz-metric-onboard-cam-motion (16)
 netBotz-metric-onboard-cam-motion-sensitivity (17)
 netBotz-snmp (40)
 netBotz-snmp-traptarget (1)
 netBotz-snmp-community (2)
 netBotz-snmp-timeout (3)
 netBotz-snmp-retries (4)
 netBotz-userid-1 (5)
 netBotz-password-1 (6)
 netBotz-userid-2 (7)
 netBotz-password-2 (8)
 netBotz-userid-3 (9)
 netBotz-password-3 (10)
 netBotz-snmp-traptarget2 (11)
 netBotz-snmp-read-community (12)
 netBotz-device (50)
 netBotz-dev-host (1)
 netBotz-dev-domain (2)
 netBotz-dev-ip (3)
 netBotz-dev-netmask (4)
 netBotz-dev-gateway (5)
 netBotz-dev-primarydns (6)
 netBotz-dev-secondarydns (7)
 netBotz-dev-smtp (8)
 netBotz-dev-smtpport (9)
 netBotz-dev-popport (10)
 netBotz-dev-loglevel (11)
 netBotz-dev-primaryemail (14)
 netBotz-dev-secondaryemail (15)
 netBotz-dev-serialno (17)
 netBotz-dev-pop (18)
 netBotz-dev-version (19)
 netBotz-dev-registered (20)
 netBotz-default-applet (21)
 netBotz-guibar-color (22)
 netBotz-locale (23)
 netBotz-timezone (24)
 netBotz-24hourpreferred (25)
 netBotz-utc-clock (26)
 netBotz-ismetric (27)
 netBotz-alert-url (28)
 netBotz-picture-alert-url (29)
 netBotz-sensor-data-url (30)
 netBotz-alert-url-logon (31)
 netBotz-picture-alert-url-logon (32)
 netBotz-sensor-data-url-logon (33)
 netBotz-sensor-data-url-period (34)
 netBotz-sensor-data-url-flags (35)
 netBotz-dev-backup-smtp (36)
 netBotz-dev-tertiarydns (37)
 netBotz-dev-ntp-server (38)
 netBotz-dev-ntp-period (39)
 netBotz-dev-socks-server (40)
 netBotz-dev-socks-portnum (41)
 netBotz-dev-socks-user-id (42)
 netBotz-dev-socks-password (43)
 netBotz-alert-ftp-site (44)
 netBotz-alert-ftp-path (45)
 netBotz-alert-ftp-filename (46)
 netBotz-alert-ftp-logon (47)
 netBotz-sensor-ftp-site (48)
 netBotz-sensor-ftp-path (49)
 netBotz-sensor-ftp-filename (50)
 netBotz-sensor-ftp-logon (51)
 netBotz-sensor-ftp-period (52)
 netBotz-use-syslog (53)
 netBotz-syslog-address (54)
 netBotz-syslog-facility (55)
 netBotz-color-balance (56)
 netBotz-addonapp (60)
 device-crawlers-trap-target-index (2)
 branch-checker-trap-target-index (3)
 vendor-netBotz (5528)
 device-crawlers-trap (2)
 branch-checker-trap (3)
 netBotz-addonapp-trap (61)
 device-crawlers-trap-attrib (2)
 device-crawlers-trap-index (20)
 device-crawlers-trap-address (21)
 device-crawlers-trap-oid (22)
 device-crawlers-trap-botoid (23)
 device-crawlers-trap-value (24)
 device-crawlers-trap-stringvalue (25)
 device-crawlers-trap-date (26)
 device-crawlers-trap-attrib-index (27)
 device-crawlers-crawlers-trap-desc (28)
 branch-checker-trap-attrib (3)
 branch-checker-trap-index (20)
 branch-checker-trap-address (21)
 branch-checker-trap-oid (22)
 branch-checker-trap-botoid (23)
 branch-checker-trap-value (24)
 branch-checker-trap-stringvalue (25)
 branch-checker-trap-date (26)
 branch-checker-trap-attrib-index (27)
 branch-checker-trap-desc (28)
netBotz-dev-host

NetBotz device's host name.
netBotz-dev-domain

NetBotz device's default DNS domain.
netBotz-dev-ip

NetBotz device's IP address.
netBotz-dev-netmask

NetBotz device's netmask.
netBotz-dev-gateway

NetBotz device's default gateway/router. 0.0.0.0 if not defined.
netBotz-dev-primarydns

Primary Domain Name Server. 0.0.0.0 if not defined.
netBotz-dev-secondarydns

Secondary Domain Name Server. 0.0.0.0 if not defined.
netBotz-dev-smtp

SMTP server address.  This is the mail server used for sending alert e-mails.
netBotz-dev-smtpport

SMTP port.  Port number of SMTP server used for sending alert e-mails.
netBotz-dev-popport

POP port.  Currently, not used.
netBotz-dev-loglevel

This field contains the log level of the NetBotz device. Log messages will be filtered, so that only same or lower-level messages will be passed. The default log level is 5, for warnings and lower levels. The log levels are the following: 1 - emergency 2 - alert 3 - critical 4 - error 5 - warning 6 - notice 7 - info 8 - trace
netBotz-dev-primaryemail

The primary email addresses for alerts and messages (list separated by commas for multiple addresses).
netBotz-dev-secondaryemail

The secondary email address for alerts and messages (list separated by commas for multiple addresses).
netBotz-dev-serialno

The serial number of the NetBotz device.
netBotz-dev-pop

POP server name.  Currently, not used.
netBotz-dev-version

The current NetBotz device firmware version.
netBotz-dev-registered

Indicates if the device has been registered with NetBotz, Inc. 1=registered, 0=not registered.
netBotz-default-applet

Setting to control if default web page should launch applet by default(1) or the HTML status page(0).
netBotz-guibar-color

Setting for color of GUI bar (RGB). Value = 0xRRGGBB.
netBotz-locale

The locale ID of the NetBotz device.  Format is ISO 639 language (lower case), an underscore, and ISO 3166 country (upper case).  Some locales are just the ISO 639 language code.
netBotz-timezone

The timezone ID of the NetBotz device.
netBotz-24hourpreferred

Indicates if 24-hour(1) versus 12-hour(0) time format is preferred.
netBotz-utc-clock

Current time of clock on NetBotz device, in UTC seconds (seconds since 1/1/1970 12:00am GMT).
netBotz-ismetric

Units are metric (1) or U.S. (0).  Applies to temperature and airflow rate.
netBotz-alert-url

The URL, if defined, to which non-picture alerts are HTTP POSTed
netBotz-picture-alert-url

The URL, if defined, to which picture alerts are HTTP POSTed, using multipart/form-data encoding.
netBotz-sensor-data-url

The URL, if defined, to which sensor data is periodically HTTP POSTed.
netBotz-alert-url-logon

The user ID and password, if defined, used for POSTing non-picture alerts. Field is write-only, and formatted <username>/<password>
netBotz-picture-alert-url-logon

The user ID and password, if defined, used for POSTing picture alerts. Field is write-only, and formatted <username>/<password>
netBotz-sensor-data-url-logon

The user ID and password, if defined, used for POSTing sensor data. Field is write-only, and formatted <username>/<password>
netBotz-sensor-data-url-period

Default number of minutes between periodic sensor data HTTP POSTs.
netBotz-sensor-data-url-flags

Option flags for data POSTs of sensor data.  Bit 0=1 if current picture should be included.  Bits 1-31 are reserved.
netBotz-dev-backup-smtp

Backup SMTP server address.  This is the backup mail server used for sending alert e-mails.
netBotz-dev-tertiarydns

Tertiary Domain Name Server. 0.0.0.0 if not defined.
netBotz-dev-ntp-server

NTP (Network Time Protocol) Server configured for appliance.
netBotz-dev-ntp-period

Hours between automatic refreshes of the appliance clock using the NTP server.
netBotz-dev-socks-server

Socks V4 or V5 proxy server configured for appliance.
netBotz-dev-socks-portnum

Port number of Socks Proxy.
netBotz-dev-socks-user-id

User ID for Socks V4 or V5 proxy server configured for appliance.
netBotz-dev-socks-password

Password for Socks V4 or V5 proxy server configured for appliance.
netBotz-alert-ftp-site

The hostname or dotted-decimal IP address of the FTP server to deliver alerts to
netBotz-alert-ftp-path

The directory on the FTP server to store alerts in.
netBotz-alert-ftp-filename

The base filename for the files on the FTP server to store alerts in.
netBotz-alert-ftp-logon

The user-id and password on the FTP server to store alerts in. Field is write-only, and formatted <username>/<password>
netBotz-sensor-ftp-site

The hostname or dotted-decimal IP address of the FTP server to deliver periodic sensor reports to
netBotz-sensor-ftp-path

The directory on the FTP server to store periodic sensor reports in.
netBotz-sensor-ftp-filename

The base filename for the files on the FTP server to store periodic sensor reports in.
netBotz-sensor-ftp-logon

The user-id and password on the FTP server to store sensor reports in. Field is write-only, and formatted <username>/<password>
netBotz-sensor-ftp-period

The period, in minutes, between delivery of sensor data reports.
netBotz-use-syslog

Enable syslog
netBotz-syslog-address

Host address to use for syslogging
netBotz-syslog-facility

Syslog facility code
netBotz-color-balance

Color balance for color camera. AUTO=automatic, FLUOR=fluorescent, DAY=daylight, INCAND=incandescent, x/y=Custom (scale red by x/64, scale blue by y/64)
netBotz-metric-onboard-model

The model description of the appliance.
netBotz-metric-onboard-temp

The reading of the built-in temperature probe, in tenths of a degree C.
netBotz-metric-onboard-humidity

The reading of the built-in humidity probe, in percent.
netBotz-metric-onboard-airflow

The reading of the built-in airflow probe, in meters/minute.
netBotz-metric-onboard-audio

The reading of the built-in audio alarm probe on/off.
netBotz-metric-onboard-doorajar

The reading of the door switch probe open(1) or closed(0).
netBotz-metric-onboard-temp-min

The temperature probe minimum, from 1 to 50 degrees C  in tenths of a degree C.
netBotz-metric-onboard-temp-max

The temperature probe maximum, from 1 to 50 degrees C in tenths of a degree C.
netBotz-metric-onboard-humidity-min

The humidity probe minimum, from 10 to 90 percent.
netBotz-metric-onboard-humidity-max

The humidity probe maximum, from 10 to 90 percent.
netBotz-metric-onboard-airflow-mins

Minutes without airflow before alarm set.
netBotz-metric-onboard-audio-secs

Seconds of alarm audio before alarm set.
netBotz-metric-onboard-switch-state

Switch state setting.  The state controls which condition of the door switch indicates an alarm.  If set to 0, alarm is set when the switch is closed.  If set to 1, alarm is set when the switch is open.
netBotz-metric-onboard-audio-level

Audio level setting, this is the relative audio level, from 0-11, above which an alarm will be sent.
netBotz-metric-onboard-airflow-level

Airflow alert level.  This is the level, in meters per second,  below which an alarm will be sent.
netBotz-metric-onboard-cam-motion

The current motion reading for the camera motion sensor (0=none, 1=motion detected, -1=not licensed).
netBotz-metric-onboard-cam-motion-sensitivity

Camera motion sensor sensitivity: 1=max, 15=min, 0=disabled.
netBotz-prd-bot-temp

The reading of the temperature probe, in degrees F or degrees C (depends on netBotz-ismetric).
netBotz-prd-bot-humidity

The reading of the humidity probe, in percent.
netBotz-prd-bot-airflow

The reading of the airflow probe.  Each unit represents approximately 40 feet/minute or 13 meters/minute of airflow velocity.
netBotz-prd-bot-audio

The reading of the audio alarm probe on/off.
netBotz-prd-bot-doorajar

The reading of the door switch probe open(1) or closed(0).
netBotz-prd-bot-temp-min

The temperature probe minimum, from 35 to 120 degrees F, or 1 to 50 degrees C (depends on netBotz-ismetric).
netBotz-prd-bot-temp-max

The temperature probe maximum, from 35 to 120 degrees F, or 1 to 50 degrees C (depends on netBotz-ismetric).
netBotz-prd-bot-humidity-min

The humidity probe minimum, from 10 to 90 percent.
netBotz-prd-bot-humidity-max

The humidity probe maximum, from 10 to 90 percent.
netBotz-prd-bot-airflow-mins

Minutes without airflow before alarm set.
netBotz-prd-bot-audio-secs

Seconds of alarm audio before alarm set.
netBotz-prd-bot-temp-enabled

Temperature probe alarm enabled(1) or disabled(0).
netBotz-prd-bot-hum-enabled

Humidity probe alarm enabled(1) or disabled(0).
netBotz-prd-bot-air-enabled

Airflow probe alarm enabled(1) or disabled(0).
netBotz-prd-bot-audio-enabled

Audio probe alarm enabled(1) or disabled(0).
netBotz-prd-bot-switch-state

Switch state setting. The state controls which condition of the door switch indicates an alarm. If set to 0, alarm is set when the switch is closed. If set to 1, alarm is set when the switch is open.
netBotz-prd-bot-switch-enabled

Door switch enabled(1) or disabled(0).
netBotz-prd-bot-audio-level

Audio level setting.  This is the relative audio level, from 0-11, above which an alarm will be sent.
netBotz-prd-bot-trap-index

The crawler ID of the last trap.
netBotz-prd-bot-trap-address

The IP address of the last trap.
netBotz-prd-bot-trap-oid

The object id of the last trap.
netBotz-prd-bot-trap-value

The value of the last object trap.
netBotz-prd-bot-trap-date

The date and time of a specific trap. This field contains the number of seconds elapsed since midnight (00:00:00), January 1, 1970
netBotz-prd-bot-refresh

Rate of web page refresh, in seconds.  This must be greater than 5 seconds.
netBotz-prd-bot-airflow-level

Airflow alert level.  This is the relative level of airflow below which an alarm will be sent.  The range is 1-11.  Each unit is approximately 40 feet/second or 13 meters/second of
      airflow velocity.
netBotz-prd-bot-doorpic-count

Number of pictures to take when door activated. These pictures will be sent as attachments to the door alert e-mail. The range is from 0 to 5 pictures.
netBotz-prd-bot-amps1

The reading of the first amperage probe, in milliamps.
netBotz-prd-bot-amps1-enabled

Amperage[1] probe alarm enabled(1) or disabled(0).
netBotz-prd-bot-amps1-min

The amperage[1] probe minimum, from 0 to 30000 milliamps.
netBotz-prd-bot-amps1-max

The amperage[1] probe maximum, from 0 to 30000 milliamps.
netBotz-prd-bot-amps2

The reading of the second amperage probe, in milliamps.
netBotz-prd-bot-amps2-enabled

Amperage[2] probe alarm enabled(1) or disabled(0).
netBotz-prd-bot-amps2-min

The amperage[2] probe minimum, from 0 to 30000 milliamps.
netBotz-prd-bot-amps2-max

The amperage[2] probe maximum, from 0 to 30000 milliamps.
netBotz-prd-bot-amps3

The reading of the third amperage probe, in milliamps.
netBotz-prd-bot-amps3-enabled

Amperage[3] probe alarm enabled(1) or disabled(0).
netBotz-prd-bot-amps3-min

The amperage[3] probe minimum, from 0 to 30000 milliamps.
netBotz-prd-bot-amps3-max

The amperage[3] probe maximum, from 0 to 30000 milliamps.
netBotz-prd-bot-amps-total

The total of the readings of all amperage probes, in milliamps.
netBotz-prd-bot-amps-total-enabled

Total amperage alarm enabled(1) or disabled(0).
netBotz-prd-bot-amps-total-min

The total amperage minimum, from 0 to 90000 milliamps.
netBotz-prd-bot-amps-total-max

The total amperage maximum, from 0 to 90000 milliamps.
netBotz-prd-bot-amps-total-support-enabled

Total Amperage Support enabled(Y) or disabled(N).
netBotz-prd-bot-amps1-uV-per-10mA

The scaling factor used for the first amperage probe to convert microvolts measured from the Amp Detect into 10s of milliamps of current.  Needs to be set based on the type of Amp Detect module installed.
netBotz-prd-bot-amps2-uV-per-10mA

The scaling factor used for the second amperage probe to convert microvolts measured from the Amp Detect into 10s of milliamps of current.  Needs to be set based on the type of Amp Detect module installed.
netBotz-prd-bot-amps3-uV-per-mA

The scaling factor used for the third amperage probe to convert microvolts measured from the Amp Detect into 10s of milliamps of current.  Needs to be set based on the type of Amp Detect module installed.
netBotz-prd-bot-amps1-max-range

The maximum RMS milliamps measureable by the first Amp Detect.
netBotz-prd-bot-amps2-max-range

The maximum RMS milliamps measureable by the second Amp Detect.
netBotz-prd-bot-amps3-max-range

The maximum RMS milliamps measureable by the third Amp Detect.
netBotz-prd-bot-amps4

The reading of the fourth amperage probe, in milliamps.
netBotz-prd-bot-amps4-enabled

Amperage[4] probe alarm enabled(1) or disabled(0).
netBotz-prd-bot-amps4-min

The amperage[4] probe minimum, in milliamps.
netBotz-prd-bot-amps4-max

The amperage[4] probe maximum, in milliamps.
netBotz-prd-bot-amps4-uV-per-10mA

The scaling factor used for the fourth amperage probe to convert microvolts measured from the Amp Detect into 10s of milliamps of current.  Needs to be set based on the type of Amp Detect module installed.
netBotz-prd-bot-amps4-max-range

The maximum RMS milliamps measureable by the fourth Amp Detect.
netBotz-prd-bot-ext-temp1

The reading of the external temperature probe on port 1, in degrees F or degrees C (depends on netBotz-ismetric).
netBotz-prd-bot-ext-temp2

The reading of the external temperature probe on port 2, in degrees F or degrees C (depends on netBotz-ismetric).
netBotz-prd-bot-ext-temp3

The reading of the external temperature probe on port 3, in degrees F or degrees C (depends on netBotz-ismetric).
netBotz-prd-bot-ext-temp1-enabled

External temperature probe on port 1 alarm enabled(1) or disabled(0).
netBotz-prd-bot-ext-temp1-min

The external temperature probe on port 1 probe minimum, in degrees F or degrees C (depends on netBotz-ismetric).
netBotz-prd-bot-ext-temp1-max

The external temperature probe on port 1 probe maximum, in degrees F or degrees C (depends on netBotz-ismetric).
netBotz-prd-bot-ext-temp2-enabled

External temperature probe on port 2 alarm enabled(1) or disabled(0).
netBotz-prd-bot-ext-temp2-min

The external temperature probe on port 2 probe minimum, in degrees F or degrees C (depends on netBotz-ismetric).
netBotz-prd-bot-ext-temp2-max

The external temperature probe on port 2 probe maximum, in degrees F or degrees C (depends on netBotz-ismetric).
netBotz-prd-bot-ext-temp3-enabled

External temperature probe on port 3 alarm enabled(1) or disabled(0).
netBotz-prd-bot-ext-temp3-min

The external temperature probe on port 3 probe minimum, in degrees F or degrees C (depends on netBotz-ismetric).
netBotz-prd-bot-ext-temp3-max

The external temperature probe on port 3 probe maximum, in degrees F or degrees C (depends on netBotz-ismetric).
netBotz-prd-bot-ext-temp1-uV-per-degreeC

The scaling factor used for the external temperature probe on port 1 to convert microvolts measured from the temperature sensor into degrees C.  Needs to be set based on the type of temperature sensor module installed.
netBotz-prd-bot-ext-temp1-uV-at-0-degreeC

The offset used for the external temperature probe on port 1 of microvolts measured from the temperature sensor at zero degrees C.  Needs to be set based on the type of temperature sensor module installed.
netBotz-prd-bot-ext-temp1-max-range

The maximum temperature measureable by the temperature sensor installed on port 1, in tenths of a degree C. Needs to be set based on the type of temperature sensor module installed.
netBotz-prd-bot-ext-temp1-min-range

The minimum temperature measureable by the temperature sensor installed on port 1, in tenths of a degree C. Needs to be set based on the type of temperature sensor module installed.
netBotz-prd-bot-ext-temp2-uV-per-degreeC

The scaling factor used for the external temperature probe on port 2 to convert microvolts measured from the temperature sensor into degrees C.  Needs to be set based on the type of temperature sensor module installed.
netBotz-prd-bot-ext-temp2-uV-at-0-degreeC

The offset used for the external temperature probe on port 2 of microvolts measured from the temperature sensor at zero degrees C.  Needs to be set based on the type of temperature sensor module installed.
netBotz-prd-bot-ext-temp2-max-range

The maximum temperature measureable by the temperature sensor installed on port 2, in tenths of a degree C. Needs to be set based on the type of temperature sensor module installed.
netBotz-prd-bot-ext-temp2-min-range

The minimum temperature measureable by the temperature sensor installed on port 2, in tenths of a degree C. Needs to be set based on the type of temperature sensor module installed.
netBotz-prd-bot-ext-temp3-uV-per-degreeC

The scaling factor used for the external temperature probe on port 3 to convert microvolts measured from the temperature sensor into degrees C.  Needs to be set based on the type of temperature sensor module installed.
netBotz-prd-bot-ext-temp3-uV-at-0-degreeC

The offset used for the external temperature probe on port 3 of microvolts measured from the temperature sensor at zero degrees C.  Needs to be set based on the type of temperature sensor module installed.
netBotz-prd-bot-ext-temp3-max-range

The maximum temperature measureable by the temperature sensor installed on port 3, in tenths of a degree C. Needs to be set based on the type of temperature sensor module installed.
netBotz-prd-bot-ext-temp3-min-range

The minimum temperature measureable by the temperature sensor installed on port 3, in tenths of a degree C. Needs to be set based on the type of temperature sensor module installed.
netBotz-prd-bot-ext-port1-module-id

The module ID of the sensor module installed on port 1.  Blank string indicates that no module is installed.
netBotz-prd-bot-ext-port1-module-type

The type of sensor module installed on port 1.  NONE=no module, AMP=AmpDetect module, TEMP=temperature sensor, DRY=dry contact sensor.
netBotz-prd-bot-ext-port2-module-id

The module ID of the sensor module installed on port 2.  Blank string indicates that no module is installed.
netBotz-prd-bot-ext-port2-module-type

The type of sensor module installed on port 2.  NONE=no module, AMP=AmpDetect module, TEMP=temperature sensor, DRY=dry contact sensor.
netBotz-prd-bot-ext-port3-module-id

The module ID of the sensor module installed on port 3.  Blank string indicates that no module is installed.
netBotz-prd-bot-ext-port3-module-type

The type of sensor module installed on port 3.  NONE=no module, AMP=AmpDetect module, TEMP=temperature sensor, DRY=dry contact sensor.
netBotz-prd-bot-amp1-total-amp-seconds

The accumulated total of amp-seconds on the AmpDetect on port 1.
netBotz-prd-bot-amp1-total-amp-seconds-since-time

The UTC time (seconds since 1/1/1970) of the beginning of the accumulated total of amp-seconds on the AmpDetect on port 1. Writing a value to this attribute resets the accumulated total amp-seconds and sets this time to the current time.
netBotz-prd-bot-amp2-total-amp-seconds

The accumulated total of amp-seconds on the AmpDetect on port 2.
netBotz-prd-bot-amp2-total-amp-seconds-since-time

The UTC time (seconds since 1/1/1970) of the beginning of the accumulated total of amp-seconds on the AmpDetect on port 2. Writing a value to this attribute resets the accumulated total amp-seconds and sets this time to the current time.
netBotz-prd-bot-amp3-total-amp-seconds

The accumulated total of amp-seconds on the AmpDetect on port 3.
netBotz-prd-bot-amp3-total-amp-seconds-since-time

The UTC time (seconds since 1/1/1970) of the beginning of the accumulated total of amp-seconds on the AmpDetect on port 3. Writing a value to this attribute resets the accumulated total amp-seconds and sets this time to the current time.
netBotz-prd-bot-amp4-total-amp-seconds

The accumulated total of amp-seconds on the AmpDetect on port 4.
netBotz-prd-bot-amp4-total-amp-seconds-since-time

The UTC time (seconds since 1/1/1970) of the beginning of the accumulated total of amp-seconds on the AmpDetect on port 4. Writing a value to this attribute resets the accumulated total amp-seconds and sets this time to the current time.
netBotz-prd-bot-amptotal-total-amp-seconds

The accumulated total of amp-seconds on the total of all AmpDetects.
netBotz-prd-bot-amptotal-total-amp-seconds-since-time

The UTC time (seconds since 1/1/1970) of the beginning of the accumulated total of amp-seconds for all AmpDetects. Writing a value to this attribute resets the accumulated total amp-seconds and sets this time to the current time.
netBotz-prd-bot-ext-dry1

The current value of the external dry contact sensor on Ext1: 0=Open, 1=Closed, -1=N/A
netBotz-prd-bot-ext-dry2

The current value of the external dry contact sensor on Ext2: 0=Open, 1=Closed, -1=N/A
netBotz-prd-bot-ext-dry3

The current value of the external dry contact sensor on Ext3: 0=Open, 1=Closed, -1=N/A
netBotz-prd-bot-ext-dry4

The current value of the external dry contact sensor on Ext4: 0=Open, 1=Closed, -1=N/A
netBotz-prd-bot-ext-dry1-alarm-value

The value to generate alarms on for the external dry contact sensor on Ext1: 0=Open, 1=Closed
netBotz-prd-bot-ext-dry1-enabled

External dry contact sensor on Ext1 alarm enabled(1) or disabled(0).
netBotz-prd-bot-ext-dry2-alarm-value

The value to generate alarms on for the external dry contact sensor on Ext2: 0=Open, 1=Closed
netBotz-prd-bot-ext-dry2-enabled

External dry contact sensor on Ext2 alarm enabled(1) or disabled(0).
netBotz-prd-bot-ext-dry3-alarm-value

The value to generate alarms on for the external dry contact sensor on Ext3: 0=Open, 1=Closed
netBotz-prd-bot-ext-dry3-enabled

External dry contact sensor on Ext3 alarm enabled(1) or disabled(0).
netBotz-prd-bot-ext-dry4-alarm-value

The value to generate alarms on for the external dry contact sensor on Ext4: 0=Open, 1=Closed
netBotz-prd-bot-ext-dry4-enabled

External dry contact sensor on Ext4 alarm enabled(1) or disabled(0).
netBotz-prd-bot-ext-dry1-label

The sensor name/label for the dry contact sensor on Ext1
netBotz-prd-bot-ext-dry1-open-label

The sensor name/label for the open(0) state for the dry contact sensor on Ext1
netBotz-prd-bot-ext-dry1-closed-label

The sensor name/label for the closed(0) state for the dry contact sensor on Ext1
netBotz-prd-bot-ext-dry1-open-to-close-millis

The minimum number of milliseconds that the dry contact sensor on Ext1 must read closed before the state is changed from open to closed.
netBotz-prd-bot-ext-dry1-close-to-open-millis

The minimum number of milliseconds that the dry contact sensor on Ext1 must read openbefore the state is changed from closed to open.
netBotz-prd-bot-ext-dry1-response

The type of alert response for the dry contact sensor on Ext1: ALERT=e-mail with no pictures, CAMERA=e-mail with pictures from camera.
netBotz-prd-bot-ext-dry2-label

The sensor name/label for the dry contact sensor on Ext2
netBotz-prd-bot-ext-dry2-open-label

The sensor name/label for the open(0) state for the dry contact sensor on Ext2
netBotz-prd-bot-ext-dry2-closed-label

The sensor name/label for the closed(0) state for the dry contact sensor on Ext2
netBotz-prd-bot-ext-dry2-open-to-close-millis

The minimum number of milliseconds that the dry contact sensor on Ext2 must read closed before the state is changed from open to closed.
netBotz-prd-bot-ext-dry2-close-to-open-millis

The minimum number of milliseconds that the dry contact sensor on Ext2 must read openbefore the state is changed from closed to open.
netBotz-prd-bot-ext-dry2-response

The type of alert response for the dry contact sensor on Ext2: ALERT=e-mail with no pictures, CAMERA=e-mail with pictures from camera.
netBotz-prd-bot-ext-dry3-label

The sensor name/label for the dry contact sensor on Ext3
netBotz-prd-bot-ext-dry3-open-label

The sensor name/label for the open(0) state for the dry contact sensor on Ext3
netBotz-prd-bot-ext-dry3-closed-label

The sensor name/label for the closed(0) state for the dry contact sensor on Ext3
netBotz-prd-bot-ext-dry3-open-to-close-millis

The minimum number of milliseconds that the dry contact sensor on Ext3 must read closed before the state is changed from open to closed.
netBotz-prd-bot-ext-dry3-close-to-open-millis

The minimum number of milliseconds that the dry contact sensor on Ext3 must read openbefore the state is changed from closed to open.
netBotz-prd-bot-ext-dry3-response

The type of alert response for the dry contact sensor on Ext3: ALERT=e-mail with no pictures, CAMERA=e-mail with pictures from camera.
netBotz-prd-bot-cam-motion

The current motion reading for the camera motion sensor (0=none, 1=motion detected)
netBotz-prd-bot-cam-motion-enabled

Camera motion sensor alarm enabled(1) or disabled(0).
netBotz-prd-bot-cam-motion-sensitivity

Camera motion sensor sensitivity: 1=max, 15=min, 0=disabled.
netBotz-prd-bot-cam-motion-delay

Camera motion sensor delay.  This is the minimum number of milliseconds of detected motion required before the alarm is triggered.
netBotz-prd-bot-camera-event-autocycle

Enables (1) or disables (0) the option to have the camera-based responses to alarm conditions automatically cycle as long as the condition persists.
netBotz-prd-bot-num-pix-before-alarm

Controls the number of pictures to be captured before any triggered alarm.
netBotz-prd-bot-delay-before-event-pix

Controls the number of milliseconds before the first picture is captured after any triggered alarm.
netBotz-prd-bot-delay-between-event-pix

Controls the number of milliseconds between pictures captured after any triggered alarm.
netBotz-prd-bot-cam-motion-area-of-motion

Camera motion sensor area of motion: 1=max, 15=min, 0=disabled.
netBotz-prd-bot-cam-pix-for-duration-of-alerts

Camera images gathered for duration of camera related alert: 0=no, 1=yes.
netBotz-prd-bot-camera-enabled

Controls whether the camera is enabled or not: 0=no, 1=yes.  Changing this will reboot the appliance.
netBotz-prd-bot-camera-is-flipped

Controls whether the camera image is flipped 180 degress or not: 0=no, 1=yes.  Changing this will reboot the appliance.
netBotz-prd-bot-camera-brightness

Sets the brightness on the camera, from 20 to 180 (20 is low, 180 is high).
expPortTable

A list of expansion port entries.
expPortEntry

An expansion port entry for a single port
expPort-module-id

The module ID of the sensor module installed.  Blank string indicates that no module is installed.
expPort-module-type

The type of sensor module installed.  NONE=no module, AMP=AmpDetect module, TEMP=temperature sensor, DRY=dry contact sensor.
expPort-label

The label for the expansion port.  Ports default to the label 'Extn', for port n.
expPort-amps

The reading of the amperage probe, in milliamps.
expPort-total-amp-seconds

The accumulated total of amp-seconds on the AmpDetect.
expPort-total-amp-seconds-since-time

The UTC time (seconds since 1/1/1970) of the beginning of the accumulated total of amp-seconds on the AmpDetect. Writing a value to this attribute resets the accumulated total amp-seconds and sets this time to the current time.
expPort-amps-enabled

Amperage probe alarm enabled(1) or disabled(0).
expPort-amps-min

The amperage probe minimum, from 0 to 30000 milliamps.
expPort-amps-max

The amperage probe maximum, from 0 to 30000 milliamps.
expPort-amps-uV-per-10mA

The scaling factor used for the amperage probe to convert microvolts measured from the Amp Detect into 10s of milliamps of current.  Needs to be set based on the type of Amp Detect module installed.
expPort-amps-max-range

The maximum RMS milliamps measureable by the AmpDetect.
expPort-ext-temp

The reading of the external temperature probe, in degrees F or degrees C (depends on netBotz-ismetric).
expPort-ext-temp-enabled

External temperature probe alarm enabled(1) or disabled(0).
expPort-ext-temp-min

The external temperature probe minimum, in degrees F or degrees C (depends on netBotz-ismetric).
expPort-ext-temp-max

The external temperature probe maximum, in degrees F or degrees C (depends on netBotz-ismetric).
expPort-ext-temp-uV-per-degreeC

The scaling factor used for the external temperature probe to convert microvolts measured from the temperature sensor into degrees C.  Needs to be set based on the type of temperature sensor module installed.
expPort-ext-temp-uV-at-0-degreeC

The offset used for the external temperature probe of microvolts measured from the temperature sensor at zero degrees C.  Needs to be set based on the type of temperature sensor module installed.
expPort-ext-temp-min-range

The minimum temperature measureable by the temperature sensor, in tenths of a degree C. Needs to be set based on the type of temperature sensor module installed.
expPort-ext-temp-max-range

The maximum temperature measureable by the temperature sensor, in tenths of a degree C. Needs to be set based on the type of temperature sensor module installed.
expPort-ext-dry

The current value of the external dry contact sensor: 0=Open, 1=Closed, -1=N/A
expPort-ext-dry-alarm-value

The value to generate alarms on for the external dry contact sensor: 0=Open, 1=Closed
expPort-ext-dry-enabled

External dry contact sensor alarm enabled(1) or disabled(0).
expPort-ext-dry-label

The sensor name/label for the dry contact sensor
expPort-ext-dry-open-label

The sensor name/label for the open(0) state for the dry contact sensor
expPort-ext-dry-closed-label

The sensor name/label for the closed(0) state for the dry contact sensor
expPort-ext-dry-open-to-close-millis

The minimum number of milliseconds that the dry contact sensor must read closed before the state is changed from open to closed.
expPort-ext-dry-close-to-open-millis

The minimum number of milliseconds that the dry contact sensor must read openbefore the state is changed from closed to open.
expPort-ext-dry-response

The type of alert response for the dry contact sensor: ALERT=e-mail with no pictures, CAMERA=e-mail with pictures from camera.
expPort-ext-humi

The reading of the external humidity probe, in percent.
expPort-ext-humi-enabled

External humidity probe alarm enabled(1) or disabled(0).
expPort-ext-humi-min

The external humidity probe minimum, in percent.
expPort-ext-humi-max

The external humidity probe maximum, in percent.
expPort-ext-humi-uV-per-percent

The scaling factor used for the external humidity probe to convert microvolts measured from the humidity sensor into percent.  Needs to be set based on the type of humidity sensor module installed.
expPort-ext-humi-uV-at-0-percent

The offset used for the external humidity probe of microvolts measured from the humidity sensor at zero percent.  Needs to be set based on the type of humidity sensor module installed.
expPort-ext-humi-min-range

The minimum humidity measureable by the humidity sensor, in percent. Needs to be set based on the type of humidity sensor module installed.
expPort-ext-humi-max-range

The maximum humidity measureable by the humidity sensor, in percent. Needs to be set based on the type of humidity sensor module installed.
netBotz-prd-crl-mib2-ping

NetBotz device ping. This object indicates the status of a ping on a device monitored by a NetBotz device.
netBotz-prd-crl-mib2-uptime

The uptime of a device monitored by a NetBotz device.
netBotz-prd-crl-mib2-snmpstatus

The SNMP status of a device monitored by a NetBotz device.
netBotz-prd-crl-mib2if-opstatus

The operational status of a device monitored by a NetBotz device.
netBotz-prd-crl-trap-index

The ID of the crawler which sent the last trap.
netBotz-prd-crl-trap-address

The IP address of the last trap.
netBotz-prd-crl-trap-oid

The object id of the attribute on the target device which is the concern of the last trap.
netBotz-prd-crl-trap-botoid

The object id of the attribute on the NetBotz device which is the concern of the last trap.
netBotz-prd-crl-trap-value

The value of the attribute associated with the last trap.
netBotz-prd-crl-trap-date

The date and time of a specific trap. This field contains the number of seconds elapsed since midnight (00:00:00), January 1, 1970
netBotz-prd-crl-trap-attrib

The identification number of the attribute in error
netBotz-prd-crl-trap-desc

Description or name of the attribute in error
netBotz-snmp-traptarget

Target of traps from the NetBotz device. This field contains the IP address where NetBotz traps are to be sent.
netBotz-snmp-community

The read/write community of the NetBotz device.
netBotz-snmp-timeout

SNMP Timeout period.
netBotz-snmp-retries

SNMP Retry count.
netBotz-userid-1

The userID of the supervisor account (write-only).
netBotz-password-1

The password of the supervisor account (write-only).
netBotz-userid-2

The userID of the full read access account (write-only).
netBotz-password-2

The password of the full read access account (write-only).
netBotz-userid-3

The userID of the minimum read access account (write-only).
netBotz-password-3

The password of the minimum read access account (write-only).
netBotz-snmp-traptarget2

Second target of traps from the NetBotz device. This field contains an additional IP address where NetBotz traps are to be sent.
netBotz-snmp-read-community

The read-only community of the NetBotz device.
device-crawlers-trap-index

The ID of the device crawler which sent the last trap.
device-crawlers-trap-address

The IP address of the appliance actually creating the last trap.
device-crawlers-trap-oid

The object id of the attribute on the device crawlers target device which is the concern of the last trap.  The second to last element indicates the index of the source of the problem (1=ICMP Ping, 2=SNMP Agent Status, 256-10239=Network Interfaces 1-9984, 10240 and above, indicates Advanced crawlers data).  The last element is the decimal representation of the IP address of the source of the problem.
device-crawlers-trap-botoid

The object id of the device crawlers attribute on the NetBotz device which is the concern of the last trap.
device-crawlers-trap-value

The integer value of the device crawlers attribute associated with the last trap.
device-crawlers-trap-stringvalue

The string representation of the value of the device crawlers attribute associated with the last trap.
device-crawlers-trap-date

The date and time of a specific device crawlers trap.  This field contains the number of seconds elapsed since midnight (00:00:00), January 1, 1970
device-crawlers-trap-attrib-index

The identification number of the device crawlers attribute in error
device-crawlers-crawlers-trap-desc

Description of the Device Crawlers Trap Attribute
branch-checker-trap-index

The ID of the branch checker which sent the last trap.
branch-checker-trap-address

The IP address of the appliance actually creating the last trap.
branch-checker-trap-oid

The object id of the attribute on the branch checker target device which is the concern of the last trap  The second to last element is the index of the source of the problem (256-260=SMTP Server, 1024-1026=DNS Server, 1536-1538=Web Server, 2048-2052=Generic Server). The last element is the decimal representation of the IP address of the source of the problem.
branch-checker-trap-botoid

The object id of the branch checker attribute on the NetBotz device which is the concern of the last trap. The second to last element is the index of the source of the problem (256-260=SMTP Server, 1024-1026=DNS Server, 1536-1538=Web Server, 2048-2052=Generic Server). The last element is the decimal representation of the IP address of the source of the problem.
branch-checker-trap-value

The integer value of the branch checker attribute associated with the last trap.
branch-checker-trap-stringvalue

The string representation of the value of the branch checker attribute associated with the last trap.
branch-checker-trap-date

The date and time of a specific branch checker trap.  This field contains the number of seconds elapsed since midnight (00:00:00), January 1, 1970
branch-checker-trap-attrib-index

The identification number of the branch checker attribute in error
branch-checker-trap-desc

Description of the Branch Checker Trap Attribute

< Back (NETBOTZ-MIB)

What did you think of this topic?