CISCO-SYS-INFO-LOG-MIB DEFINITIONS ::= BEGIN

IMPORTS
   OBJECT-TYPE,
   MODULE-IDENTITY,
   NOTIFICATION-TYPE,
   Unsigned32
       FROM SNMPv2-SMI

   RowStatus,
   TruthValue
       FROM SNMPv2-TC

   InetAddress,
   InetAddressType
       FROM INET-ADDRESS-MIB

   MODULE-COMPLIANCE,
   OBJECT-GROUP,
   NOTIFICATION-GROUP
       FROM SNMPv2-CONF

   SnmpAdminString
       FROM SNMP-FRAMEWORK-MIB

   ciscoMgmt
       FROM CISCO-SMI;

ciscoSysInfoLogMIB MODULE-IDENTITY
   LAST-UPDATED "200301241000Z"
   ORGANIZATION "Cisco System, Inc."
   CONTACT-INFO
           "         Cisco Systems
                     Customer Service

             Postal: 170 W Tasman Drive
                     San Jose, CA  95134
                     USA

                Tel: +1 800 553-NETS

       E-mail: cs-lan-switch-snmp@cisco.com"
   DESCRIPTION
       "This MIB provides the configuration of System Information
        Logging feature, which allows a certain number of commands
        to be executed periodically via command line interface,
        and stores the result into a file on a configured server."

   REVISION   "200301241000Z"
   DESCRIPTION
       "Initial version of this MIB module."
   ::= {ciscoMgmt 330}

ciscoSysInfoLogMIBNotifs   OBJECT IDENTIFIER ::= {ciscoSysInfoLogMIB 0}
ciscoSysInfoLogMIBObjects  OBJECT IDENTIFIER ::= {ciscoSysInfoLogMIB 1}
ciscoSysInfoLogMIBConform  OBJECT IDENTIFIER ::= {ciscoSysInfoLogMIB 2}

csilGlobalConfig  OBJECT IDENTIFIER ::= {ciscoSysInfoLogMIBObjects 1}
csilServerConfig  OBJECT IDENTIFIER ::= {ciscoSysInfoLogMIBObjects 2}
csilCommandConfig OBJECT IDENTIFIER ::= {ciscoSysInfoLogMIBObjects 3}

-- csilGlobalConfig group

csilSysInfoLogEnabled OBJECT-TYPE
   SYNTAX      TruthValue
   MAX-ACCESS  read-write
   STATUS      current
   DESCRIPTION
       "Specifies whether System Information Logging has been
        enabled in the system or not."
   ::= {csilGlobalConfig 1}

csilSysInfoLogNotifEnabled OBJECT-TYPE
   SYNTAX      TruthValue
   MAX-ACCESS  read-write
   STATUS      current
   DESCRIPTION
       "This object controls whether notifications will be generated
        by system logging process or not."
   ::= {csilGlobalConfig 2}

-- csilServerConfig group

csilMaxServerAllowed OBJECT-TYPE
   SYNTAX      Unsigned32 (0..65535)
   UNITS       "servers"
   MAX-ACCESS  read-write
   STATUS      current
   DESCRIPTION
       "Specifies the maximum number of entries that can be configured
        in csilServerTable. A value of zero indicates no limit on the
        numbers of  entries in the csilServerTable."
   ::= {csilServerConfig 1}

csilMaxProfilePerServerAllowed OBJECT-TYPE
   SYNTAX      Unsigned32
   UNITS       "profiles"
   MAX-ACCESS  read-only
   STATUS      current
   DESCRIPTION
       "Indicates the maximum number of command profiles allowed to
        configure for a logging server. A profile defines a set of
        commands that will be used for system information logging
        purpose."
   ::= {csilServerConfig 2}

csilServerTable OBJECT-TYPE
   SYNTAX      SEQUENCE OF CsilServerEntry
   MAX-ACCESS  not-accessible
   STATUS      current
   DESCRIPTION
       "A table of servers used to keep the data files for System
        Information Logging purpose."
   ::= {csilServerConfig 3}

csilServerEntry OBJECT-TYPE
   SYNTAX      CsilServerEntry
   MAX-ACCESS  not-accessible
   STATUS      current
   DESCRIPTION
       "Information about a server to keep the data file for System
        Information Logging purpose. Entries in this table can be
        created or deleted using csilServerRowStatus object."
   INDEX {csilServerIndex}
   ::= {csilServerTable 1}

CsilServerEntry ::= SEQUENCE {
  csilServerIndex            Unsigned32,
  csilServerAddressType      InetAddressType,
  csilServerAddress          InetAddress,
  csilServerProfileIndex     Unsigned32,
  csilServerProtocol         INTEGER,
  csilServerInterval         Unsigned32,
  csilServerLoggingFileName  SnmpAdminString,
  csilServerRcpUserName      SnmpAdminString,
  csilServerLastStatus       INTEGER,
  csilServerRowStatus        RowStatus
}

csilServerIndex OBJECT-TYPE
   SYNTAX        Unsigned32
   MAX-ACCESS    not-accessible
   STATUS        current
   DESCRIPTION
       "An arbitrary index assigned by the NMS to identify the
        entry. Maximum value of this object is limited by the
        value of csilMaxServerAllowed."
   ::= {csilServerEntry 1}

csilServerAddressType OBJECT-TYPE
   SYNTAX        InetAddressType
   MAX-ACCESS    read-create
   STATUS        current
   DESCRIPTION
      "Specifies the type of address used to determine the address
       of the server to be used for logging system information."
   ::= {csilServerEntry 2}

csilServerAddress OBJECT-TYPE
   SYNTAX        InetAddress
   MAX-ACCESS    read-create
   STATUS        current
   DESCRIPTION
       "Specifies the address of the remote host used for logging
        system information."
   ::= {csilServerEntry 3}

csilServerProfileIndex OBJECT-TYPE
   SYNTAX        Unsigned32
   MAX-ACCESS    read-create
   STATUS        current
   DESCRIPTION
       "Specifies the profile assigned to this server. A profile is a
        set of specific commands defined in csilCommandConfigTable,
        which will be executed in the period specified by the object
        csilServerInterval for logging system information to the
        server."
   ::= {csilServerEntry 4}

csilServerProtocol OBJECT-TYPE
   SYNTAX       INTEGER { tftp(1), rcp(2) }
   MAX-ACCESS   read-create
   STATUS       current
   DESCRIPTION
       "Specifies the file transfer protocol to be used for logging
        system information.

        - tftp(1): indicates that tftp is used for logging system
                   information.

        - rcp(2):  indicates that rcp is used for logging system
                   information."
   ::= {csilServerEntry 5}

csilServerRcpUserName OBJECT-TYPE
   SYNTAX       SnmpAdminString
   MAX-ACCESS   read-create
   STATUS       current
   DESCRIPTION
       "Specifies the remote user name used to download system
        information via RCP protocol. This object must be set when
        csilServerProtocol is set to rcp(2). This object will have
        no effect for protocols other than RCP."
   DEFVAL       { "" }
   ::= {csilServerEntry 6}

csilServerInterval OBJECT-TYPE
   SYNTAX       Unsigned32
   UNITS        "minutes"
   MAX-ACCESS   read-create
   STATUS       current
   DESCRIPTION
       "A period of time, measured in unit of minutes. This object
        specifies how often the command set is executed for
        logging system information."
   DEFVAL       { 1440 }
   ::= {csilServerEntry 7}

csilServerLoggingFileName OBJECT-TYPE
   SYNTAX        SnmpAdminString
   MAX-ACCESS    read-create
   STATUS        current
   DESCRIPTION
       "Specifies the file name used for logging system
        information."
   ::= {csilServerEntry 8}

csilServerLastStatus OBJECT-TYPE
   SYNTAX        INTEGER {
                   none(1),
                   noLogFile(2),
                   noCommand(3),
                   linkBlock(4),
                   authError(5),
                   addrError(6),
                   copying(7),
                   writeError(8),
                   success(9)
                 }
   MAX-ACCESS    read-only
   STATUS        current
   DESCRIPTION
       "Indicates the status of the last system information
        logging process into the server.

          - none(1): initial state. No process has been started.
          - noLogFile(2): there is no log file has been configured.
          - noCommand(3): there is no command has been configured.
          - linkBlock(4): another process might have taken the
                rcp or tftp connection at the time the interval
                is due.
          - authError(5): authentication failed.
          - addrError(6): an error occurs due to the destination
                address is not reachable.
          - copying(7)  : logging process to destination server is
                in progress.
          - writeError(8): an error occurs while copying logging
                information to the server.
          - success(9): logging process completed successfully."
   ::= {csilServerEntry 9}

csilServerRowStatus OBJECT-TYPE
   SYNTAX        RowStatus
   MAX-ACCESS    read-create
   STATUS        current
   DESCRIPTION
       "This object is used to manage the creation, modification
        and deletion of rows in the table.

        Except of csilServerRcpUserName, all other objects need to
        be set before csilServerRowStatus can be set to 'active'.
        When this object is set to be 'active', the entry can not be
        modified."
   ::= {csilServerEntry 10}


-- csilCommandConfig group

csilMaxCommandPerProfile OBJECT-TYPE
   SYNTAX      Unsigned32
   MAX-ACCESS  read-write
   STATUS      current
   DESCRIPTION
       "Specifies the maximum commands allowed in a profile. A
        value of zero indicates no limitation on the number of
        commands allowed in a profile."
   ::= {csilCommandConfig 1}


csilCommandsTable OBJECT-TYPE
   SYNTAX        SEQUENCE OF CsilCommandsEntry
   MAX-ACCESS    not-accessible
   STATUS        current
   DESCRIPTION
       "A table of commands for System Information Logging
        purpose."
   ::= {csilCommandConfig 2}

csilCommandsEntry OBJECT-TYPE
   SYNTAX        CsilCommandsEntry
   MAX-ACCESS    not-accessible
   STATUS        current
   DESCRIPTION
       "An entry contains the command logging information regarding
        a profile and a command index combination. Entries in this
        table can be created or deleted using csilCommandStatus
        object."
   INDEX {csilCommandProfileIndex,
          csilCommandIndex}
   ::= {csilCommandsTable 1}

CsilCommandsEntry ::= SEQUENCE {
   csilCommandProfileIndex  Unsigned32,
   csilCommandIndex         Unsigned32,
   csilCommandString        SnmpAdminString,
   csilCommandExecOrder     Unsigned32,
   csilCommandStatus        RowStatus
}

csilCommandProfileIndex OBJECT-TYPE
   SYNTAX        Unsigned32
   MAX-ACCESS    not-accessible
   STATUS        current
   DESCRIPTION
       "An arbitrary index assigned by NMS to uniquely identify a
        profile. A profile contains a set of commands that will be
        executed periodically for the purpose of logging system
        information."
   ::= {csilCommandsEntry 1}

csilCommandIndex OBJECT-TYPE
   SYNTAX        Unsigned32
   MAX-ACCESS    not-accessible
   STATUS        current
   DESCRIPTION
       "An arbitrary index assigned by NMS, which is combined with
        the value of csilCommandProfileIndex object to uniquely
        identify an entry."
   ::= {csilCommandsEntry 2}

csilCommandString OBJECT-TYPE
   SYNTAX        SnmpAdminString  (SIZE (1..255))
   MAX-ACCESS    read-create
   STATUS        current
   DESCRIPTION
       "Specifies the command to be executed."
   ::= {csilCommandsEntry 3}

csilCommandExecOrder OBJECT-TYPE
   SYNTAX        Unsigned32
   MAX-ACCESS    read-create
   STATUS        current
   DESCRIPTION
       "Specifies the order in which the command specified in the
        object csilCommandLog will be executed periodically for
        loging system information. Value of this object need not to
        be consistent as it can be changed during the configuration
        of the command set. Execution order of commands in the
        lower part of the list will be moved up or pushed down when
        a command is removed from or inserted to a position in the
        middle of the list, respectively. For example, there is a
        list of three commands 'show A', 'show B' and 'show C' with
        the execution orders as 1, 2 and 3 respectively. If 'show
        B' is removed from the list, the execution order of 'show
        C' will be changed from 3 to 2. If 'show D' is added to the
        list with the execution order as 2, the execution order of
        'show B' and 'show C' will be changed to 3 and 4,
        respectively.

        Execution order of new commands appended to the list must be
        continuous with the execution order of the last existing
        command on the list, otherwise it will be rejected."
   ::= {csilCommandsEntry 4}

csilCommandStatus OBJECT-TYPE
   SYNTAX        RowStatus
   MAX-ACCESS    read-create
   STATUS        current
   DESCRIPTION
       "This object is used to manage the creation, modification and
        deletion of rows in this table.

        Value of this object can be set to 'active' only when value of
        other columns have been assigned. The entry may not be
        modified when value of this object is 'active'."
   ::= {csilCommandsEntry 5}

-- Notification

csilLoggingFailNotif NOTIFICATION-TYPE
   OBJECTS {
        csilServerLastStatus
   }
   STATUS        current
   DESCRIPTION
       "A csilLoggingFailNotif is sent for an unsuccessful system
        information logging process, specifically when value of
        csilServerLastStatus is changed to any one of the failure
        states (2, 3, 4, 5, 6 and 8)."
   ::= {ciscoSysInfoLogMIBNotifs 1}

------------------------------------------
-- Conformance Information
------------------------------------------
ciscoSysInfoLogMIBCompliances
                 OBJECT IDENTIFIER ::= {ciscoSysInfoLogMIBConform 1}
ciscoSysInfoLogMIBGroups
                 OBJECT IDENTIFIER ::= {ciscoSysInfoLogMIBConform 2}

-- Compliance

ciscoSysInfoLogMIBCompliance MODULE-COMPLIANCE
   STATUS     current
   DESCRIPTION
       "The compliance statement for agents which implement
        CISCO-SYS-INFO-LOG-MIB.

        OBJECT  csilMaxServerAllowed
        SYNTAX  Unsigned32(1)
        ACCESS-TYPE  read-only
        DESCRIPTION
            An implementation is only required to support one
            logging server.

        OBJECT  csilServerAddressType
        SYNTAX  InetAddressType (ipv4(1))
        DESCRIPTION
            An implementation is only required to support IPv4
            addresses.

        OBJECT csilMaxCommandPerProfile
        SYNTAX Unsigned32(15)
        ACCESS-TYPE read-only
        DESCRIPTION
            An implementation is only required to support maximum
            15 commands in a profile.

        OBJECT csilCommandString
        SYNTAX SnmpAdminString (SIZE (1..48))
        DESCRIPTION
            An implementation is only required to support commands
            not having more than 48 characters."

   MODULE  -- this module
        MANDATORY-GROUPS {
           csilGlobalConfigGroup,
           csilServerConfigGroup,
           csilCommandConfigGroup
        }

        OBJECT     csilServerRowStatus
        SYNTAX     INTEGER {active(1)}
        MIN-ACCESS read-only
        DESCRIPTION
            "Write access is not required, and only one of the
             six enumerated values for the RowStatus textual
             convention needs to be supported, specifically:
             active(1)."

        GROUP  csilNotifControlGroup
        DESCRIPTION
            "The csilNotifControlGroup is optional."

        GROUP  csilLoggingFailNotifGroup
        DESCRIPTION
            "The csilLoggingFailNotifGroup is optional."

        OBJECT      csilServerInterval
        SYNTAX      Unsigned32 (1..64800)
        MIN-ACCESS  read-only
        DESCRIPTION
            "An implementation is only required to support the
             interval from 1 minute to 45 days."

   ::= {ciscoSysInfoLogMIBCompliances 1}


-- Units of Conformance

csilGlobalConfigGroup  OBJECT-GROUP
   OBJECTS {
         csilSysInfoLogEnabled
  }
  STATUS      current
  DESCRIPTION
      "A collection of objects that provides the global
       configuration for logging system information."
  ::= {ciscoSysInfoLogMIBGroups 1}

csilServerConfigGroup OBJECT-GROUP
  OBJECTS {
         csilMaxServerAllowed,
         csilMaxProfilePerServerAllowed,
         csilServerAddress,
         csilServerAddressType,
         csilServerProfileIndex,
         csilServerProtocol,
         csilServerInterval,
         csilServerLoggingFileName,
         csilServerRcpUserName,
         csilServerLastStatus,
         csilServerRowStatus
   }
   STATUS     current
   DESCRIPTION
       "A collection of objects that provides the status and
        control of logging servers."
   ::= {ciscoSysInfoLogMIBGroups 2}

csilCommandConfigGroup OBJECT-GROUP
  OBJECTS {
         csilMaxCommandPerProfile,
         csilCommandString,
         csilCommandExecOrder,
         csilCommandStatus
  }
  STATUS     current
  DESCRIPTION
      "A collection of objects that provides the status and
       control of commands used for logging system information."
  ::= {ciscoSysInfoLogMIBGroups 3}

csilNotifControlGroup OBJECT-GROUP
  OBJECTS {
         csilSysInfoLogNotifEnabled
  }
  STATUS     current
  DESCRIPTION
      "A collection of objects that provides the status and
       control of logging process notifications."
  ::= {ciscoSysInfoLogMIBGroups 4}

csilLoggingFailNotifGroup NOTIFICATION-GROUP
  NOTIFICATIONS {
         csilLoggingFailNotif
  }
  STATUS     current
  DESCRIPTION
      "A collection of notifications for supporting system information
       logging feature."
  ::= {ciscoSysInfoLogMIBGroups 5}
END