cnfCIInterfaceTable This table provides Netflow Enable information per interface.

cnfCIInterfaceEntry A conceptual row in the cnfCIInterfaceEntry.

cnfCINetflowEnable Indicates whether the netflow feature is enabled for this interface, and if so, in which directions.

cnfCICacheTable A table containing configuration and statistics per cache. Cache may be main cache or an aggregation cache.

cnfCICacheEntry A conceptual row in the cnfCICacheEntry.

cnfCICacheType The type of netflow cache.

NetFlow aggregation maintains one or more extra flow caches with different combinations of fields that determine which traditional flows are grouped together.

cnfCICacheEnable Indicates whether netflow is enabled for this cache type.

cnfCICacheEntries The number of entries that can be cached for this cache type. The accepted value could be limited based on the amount of memory available in the system.

cnfCIActiveFlows Number of currently active flow entries.

cnfCIInactiveFlows Number of available flow entries.

cnfCIActiveTimeOut The timeout period (in minutes) for removing active flows from the cache.

cnfCIInactiveTimeOut The timeout period (in seconds) for removing inactive flows from the cache.

cnfCIMinSourceMask Source route's minimum configured mask bits. This is used to configure the minimum mask for Router Based Aggregation (RBA). Minimum masking capability is available only if RBA is enabled. A value of 0 indicates that this object is not applicable to this cache type.

cnfCIMinDestinationMask Destination route's minimum configured mask bits. This is used to configure the minimum mask for Router Based Aggregation (RBA). Minimum masking capability is available only if RBA is enabled. A value of 0 indicates that this object is not applicable to this cache type.

cnfEIExportInfoTable A table containing information about export configuration per cache type.

cnfEIExportInfoEntry A conceptual row in the cnfEIExportInfoEntry.

cnfEIExportVersion The NetFlow data export version.

cnfEIPeerAS This object enables collection of AS numbers from a peer autonomous system. cnfEIPeerAS, cnfEIOriginAS and cnfEIBgpNextHop are interdependent.

cnfEIOriginAS This object enables collection of AS numbers from an origin autonomous system. cnfEIPeerAS, cnfEIOriginAS and cnfEIBgpNextHop are interdependent.

cnfEIBgpNextHop This object enables collection of BGP Next Hops. cnfEIPeerAS, cnfEIOriginAS and cnfEIBgpNextHop are interdependent.

cnfEIMaxCollectors Maximum number of entries allowed in the cnfEICollectorTable for each cache type. A zero indicates export is not supported in the device. The agent should set this value during initialization, and the value for this object cannot be changed during the system's operation.

cnfEICollectorTable A control table to configure the collectors that the netflow packets are exported to. The number of entries that can be configured for the cache type is limited by the value of cnfEIMaxCollectors.

cnfEICollectorEntry A conceptual row in the cnfEICollectorEntry.

cnfEICollectorAddressType The type of Internet address used by this entry.

cnfEICollectorAddress The Internet address of the collector. This is the address which the Netflow data is exported to.

cnfEICollectorPort The transport port of the collector which the Netflow data is exported to.

cnfEICollectorStatus This object is used to create or delete an entry in the cnfEICollectorTable.

* A row may be created using the 'CreateAndGo' option. When
 the row is successfully created, the RowStatus would be
 set to 'active' by the agent.

* A row may be deleted by setting the RowStatus to 'destroy'.

cnfESSampledPacket Number of Sampled Packet.

cnfESExportRate Number of Bytes exported per second.

cnfESRecordsExported Number of flow statistics records which were exported.

cnfESPktsExported Number of packets (udp datagrams) which were exported.

cnfESPktsFailed Number of times a flow record could not be exported because of a pak allocation failure.

cnfESPktsDropped Number of export packets which were dropped at the time of ipwrite operation. The reasons for this failure are no FIB, adjacency failure, MTU failed, enqueue failed, IPC failed etc.

cnfPSPacketSizeDistribution A string contain IP Packet Size Distribution statistics. Distribution grouping are following :1-32   64   96  128 160  192  224  256 288  320  352 384  416  448  480  512 544  576 1024 1536 2048 2560 3072 3584 4096 4608. Value for each group will be expressed in 2 bytes (in Network byte order) and need to divide by 1000 to get the exact value given by CLI using show ip cache flow command.

cnfPSLastClearElapsedTime Object indicates time in millisecond since the last clearing time of protocol statistics.

cnfPSProtocolStatTable A table containing statistics per protocol. Information sorted in this table is global in nature (i.e. it's updated for all line cards where netflow is enabled) and follows the Counter64 semantics as described in RFC 2578.

cnfPSProtocolStatEntry A conceptual row in the CnfPSProtocolStatEntry.

cnfPSProtocolType This object is used as INDEX for protocol statistic table. Protocol type consists of groups based on well known ports and protocols.

cnfPSExpiredFlows Number of flows belonging to the same protocol and port that were expired. This counter is incremented when a flow expires due to some reason like time out of flows, event based aging etc.

cnfPSPackets Number of Packets belonging to the same protocol and port which were switched by netflow enabled interface(s). This counter contains the number of Packets switched by all netflow enabled line cards.

cnfPSBytes Number of Bytes belonging to the same protocol and port, which were switched by netflow enabled interface(s). This counter contains the number of Packets switched by all netflow enabled line cards.

cnfPSActive This is a summation of active time of all flows belonging to the same protocol and port in milliseconds. The time between first switched packet and last switched packet is measured as the active time of a flow.

cnfPSInactive This is a summation of inactive time of all flows belonging to the same protocol and port in milliseconds. The time between the last switched packet and expiry of a flow is measured as the inactive time of a flow.

cnfTemplateOptionsFlag Object to indicate Sub- technologies in option template.

cnfTemplateTable A control table to provide statistics of version 9 Flow and Option templates.

cnfTemplateEntry A conceptual row in the cnfTemplateEntry.

cnfTemplateType Defines the structure and interpretation of fields in a data record and serves as an INDEX in this table. Version 9 has two types of Templates: Flow Templates and Option Templates.

cnfTemplateAdded Number of templates added.

cnfTemplateActive Number of active templates.

cnfTemplateAgerPolls Number of template ager polls.

cnfTemplateExportInfoTable A control table providing information about version 9.

cnfTemplateExportInfoEntry A conceptual row in the cnfTemplateExportInfoEntry.

cnfTemplateExportVer9Enable Object to indicate whether version 9 export is configured or not.

cnfTemplateExportVer9TplTimeout Export template time out. Templates are resent after this time.

cnfTemplateExportVer9OptTimeout Export option time out. Options are resent after this time.

cnfTemplateExportVer9TplRefreshRate Template refresh rate. Templates are resent after this many packets.

cnfTemplateExportVer9OptRefreshRate Option refresh rate. Options are resent after this many packets.

cnfTopFlowsTimeStamp Indicates the time when cnfTopFlowsTable was last updated.

cnfTopFlowsTopN Maximum number of top flows to calculate. A value of 0 disables the Top Flows feature.

cnfTopFlowsAvailableFlows The number of entries currently available in cnfTopFlowsTable.

cnfTopFlowsMatchingFlows Total number of matching flows in the netflow cache.

cnfTopFlowsTotalFlows Total number of flows in the netflow cache.

cnfTopFlowsSortBy Indicates how the entries in cnfTopFLowsTable are to be sorted. A value of 'noSort' disables Top Flows.

cnfTopFlowsCacheTimeout Top Flows Cache timeout. Top flows are cached for this length of time and not recalculated. Configure a high value to ensure the cache does not change during long queries. Setting this object (to any value) will expire the cache.

cnfTopFlowsTable Table of flows which have accrued the highest packets or bytes. Each row in the table represents one flow from the cache.

cnfTopFlowsTableEntry A conceptual row in the cnfTopFlowsTable.

cnfTopFlowsIndex Index to select top flows. A value of 1 selects the topmost flow.

cnfTopFlowsSrcAddressType Type of source address.

cnfTopFlowsSrcAddress Source address.

cnfTopFlowsSrcAddressMask Number of bits in source address mask.

cnfTopFlowsDstAddressType Type of destination address.

cnfTopFlowsDstAddress Destination address.

cnfTopFlowsDstAddressMask Number of bits in destination address mask.

cnfTopFlowsNhAddressType The type of nexthop address.

cnfTopFlowsNhAddress Nexthop address.

cnfTopFlowsSrcPort Source port number.

cnfTopFlowsDstPort Destination port number.

cnfTopFlowsSrcAS Source AS number.

cnfTopFlowsDstAS Destination AS number.

cnfTopFlowsInputIfIndex Input interface index.

cnfTopFlowsOutputIfIndex Output interface index.

cnfTopFlowsFirstSwitched Time flow was first switched.

cnfTopFlowsLastSwitched Time flow was last switched.

cnfTopFlowsTOS Type of service.

cnfTopFlowsProtocol Protocol number.

cnfTopFlowsTCPFlags TCP flags.

cnfTopFlowsSamplerID Netflow Sampler ID.

cnfTopFlowsClassID Netflow Class ID.

cnfTopFlowsFlags Flow flags.

cnfTopFlowsBytes Number of bytes in the flow.

cnfTopFlowsPackets Number of packets in the flow.

cnfTopFlowsVlan The VLAN-ID of this flow.

cnfTopFlowsMatchSrcAddressType Source address type to match. A value of 'unknown' (ie, 0) indicates the source address is not used as a top flows match criteria, and clears the cnfTopFlowsMatchSrcAddress and cnfTopFlowsMatchSrcAddressMask configuration.

cnfTopFlowsMatchSrcAddress Source address prefix to match.

cnfTopFlowsMatchSrcAddressMask The length of the match source address prefix. This prefix length must be consistent with the address type specified in cnfTopFlowsMatchSrcAddressType. A length of zero only matches the all-zero address of the specified type.

cnfTopFlowsMatchDstAddressType Destination address type to match. A value of 'unknown' (ie, 0) indicates the destination address is not used as a top flows match criteria, and clears the cnfTopFlowsMatchDstAddress and cnfTopFlowsMatchDstAddressMask configuration.

cnfTopFlowsMatchDstAddress Destination address prefix to match.

cnfTopFlowsMatchDstAddressMask The length of the match destination address prefix. This prefix length must be consistent with the address type specified in cnfTopFlowsMatchDstAddressType. A length of zero only matches the all-zero address of the specified type.

cnfTopFlowsMatchNhAddressType Nexthop address type to match. A value of 'unknown' (ie, 0) indicates the nexthop address is not used as a top flows match criteria, and clears the cnfTopFlowsMatchNhAddress and cnfTopFlowsMatchNhAddressMask configuration.

cnfTopFlowsMatchNhAddress Nexthop address prefix to match.

cnfTopFlowsMatchNhAddressMask The length of the match nexthop address Prefix. This prefix length must be consistent with the address type specified in cnfTopFlowsMatchNhAddressType. A length of zero only matches the all-zero address of the specified type.

cnfTopFlowsMatchSrcPortLo The minimum value that the layer-4 source port number in the flow must have in order to match. A value of -1 disables this match criteria.

cnfTopFlowsMatchSrcPortHi The maximum value that the layer-4 source port number in the flow must have in order to match. A value of -1 disables this match criteria.

cnfTopFlowsMatchDstPortLo The minimum value that the layer-4 destination port number in the flow must have in order to match. A value of -1 disables this match criteria.

cnfTopFlowsMatchDstPortHi The maximum value that the layer-4 destination port number in the flow must have in order to match. A value of -1 disables this match criteria.

cnfTopFlowsMatchSrcAS Source AS number to match. A value of -1 disables this match criteria.

cnfTopFlowsMatchDstAS Destination AS number to match. A value of -1 disables this match criteria.

cnfTopFlowsMatchInputIf Input interface to match. A value of 0 disables this match criteria.

cnfTopFlowsMatchOutputIf Output interface to match. A value of 0 disables this match criteria.

cnfTopFlowsMatchTOSByte TOS byte to match. A value of -1 disables this match criteria.

cnfTopFlowsMatchProtocol Protocol to match. A value of -1 disables this match criteria.

cnfTopFlowsMatchSampler Sampler name to match. Leave blank to disable this match criteria.

cnfTopFlowsMatchClass Class name to match. Leave blank to disable this match criteria.

cnfTopFlowsMatchMinPackets Minimum packets to match. A value of 0 disables this match criteria.

cnfTopFlowsMatchMaxPackets Maximum packets to match. A value of 0 disables this match criteria.

cnfTopFlowsMatchMinBytes Minimum bytes to match. A value of 0 disables this match criteria.

cnfTopFlowsMatchMaxBytes Maximum bytes to match. A value of 0 disables this match criteria.

cnfTopFlowsMatchDirection Flow direction to match. A value of 0 disables this match criteria.

cnfTopFlowsGenerate A control variable used to generate the Top Flows. When this object is set to 'true', the current entries in cnfTopFlowsTable will be removed, Top Flows will be recalculated and new entries will be populated in cnfTopFlowsTable. Setting this object to 'false' has no effect.

When read, this object always returns 'false'.

cnfTopFlowsReportAvailable Indicates whether the Top Flows have been successfully generated and entries in cnfTopFlowsTable are populated.

cnfMIBCompliance The compliance statement for the CISCO-NETFLOW-MIB.

OBJECT cnfCollectorAddressType SYNTAX InetAddressType { ipv4(1) } DESCRIPTION
    An implementation is only required to support IPv4
    addresses.

OBJECT cnfCollectorAddress SYNTAX InetAddress (SIZE(4)) DESCRIPTION
    An implementation is only required to support IPv4
    addresses.

OBJECT cnfTopFlowsSrcAddressType SYNTAX InetAddressType { ipv4(1) } DESCRIPTION
    An implementation is only required to support IPv4
    addresses.

OBJECT cnfTopFlowsSrcAddress SYNTAX InetAddress (SIZE(4)) DESCRIPTION
    An implementation is only required to support IPv4
    addresses.

OBJECT cnfTopFlowsDstAddressType SYNTAX InetAddressType { ipv4(1) } DESCRIPTION
    An implementation is only required to support IPv4
    addresses.

OBJECT cnfTopFlowsDstAddress SYNTAX InetAddress (SIZE(4)) DESCRIPTION
    An implementation is only required to support IPv4
    addresses.

OBJECT cnfTopFlowsNhAddressType SYNTAX InetAddressType { ipv4(1) } DESCRIPTION
    An implementation is only required to support IPv4
    addresses.

OBJECT cnfTopFlowsNhAddress SYNTAX InetAddress (SIZE(4)) DESCRIPTION
    An implementation is only required to support IPv4
    addresses.

OBJECT cnfTopFlowsMatchSrcAddressType SYNTAX InetAddressType { ipv4(1) } DESCRIPTION
    An implementation is only required to support IPv4
    addresses.

OBJECT cnfTopFlowsMatchSrcAddress SYNTAX InetAddress (SIZE(4)) DESCRIPTION
    An implementation is only required to support IPv4
    addresses.

OBJECT cnfTopFlowsMatchDstAddressType SYNTAX InetAddressType { ipv4(1) } DESCRIPTION
    An implementation is only required to support IPv4
    addresses.

OBJECT cnfTopFlowsMatchDstAddress SYNTAX InetAddress (SIZE(4)) DESCRIPTION
    An implementation is only required to support IPv4
    addresses.

OBJECT cnfTopFlowsMatchNhAddressType SYNTAX InetAddressType { ipv4(1) } DESCRIPTION
    An implementation is only required to support IPv4
    addresses.

OBJECT cnfTopFlowsMatchNhAddress SYNTAX InetAddress (SIZE(4)) DESCRIPTION
    An implementation is only required to support IPv4
    addresses.

cnfMIBCompliance1 The compliance statement for the CISCO-NETFLOW-MIB.

OBJECT cnfCollectorAddressType SYNTAX InetAddressType { ipv4(1) } DESCRIPTION
    An implementation is only required to support IPv4
    addresses.

OBJECT cnfCollectorAddress SYNTAX InetAddress (SIZE(4)) DESCRIPTION
    An implementation is only required to support IPv4
    addresses.

OBJECT cnfTopFlowsSrcAddressType SYNTAX InetAddressType { ipv4(1) } DESCRIPTION
    An implementation is only required to support IPv4
    addresses.

OBJECT cnfTopFlowsSrcAddress SYNTAX InetAddress (SIZE(4)) DESCRIPTION
    An implementation is only required to support IPv4
    addresses.

OBJECT cnfTopFlowsDstAddressType SYNTAX InetAddressType { ipv4(1) } DESCRIPTION
    An implementation is only required to support IPv4
    addresses.

OBJECT cnfTopFlowsDstAddress SYNTAX InetAddress (SIZE(4)) DESCRIPTION
    An implementation is only required to support IPv4
    addresses.

OBJECT cnfTopFlowsNhAddressType SYNTAX InetAddressType { ipv4(1) } DESCRIPTION
    An implementation is only required to support IPv4
    addresses.

OBJECT cnfTopFlowsNhAddress SYNTAX InetAddress (SIZE(4)) DESCRIPTION
    An implementation is only required to support IPv4
    addresses.

OBJECT cnfTopFlowsMatchSrcAddressType SYNTAX InetAddressType { ipv4(1) } DESCRIPTION
    An implementation is only required to support IPv4
    addresses.

OBJECT cnfTopFlowsMatchSrcAddress SYNTAX InetAddress (SIZE(4)) DESCRIPTION
    An implementation is only required to support IPv4
    addresses.

OBJECT cnfTopFlowsMatchDstAddressType SYNTAX InetAddressType { ipv4(1) } DESCRIPTION
    An implementation is only required to support IPv4
    addresses.

OBJECT cnfTopFlowsMatchDstAddress SYNTAX InetAddress (SIZE(4)) DESCRIPTION
    An implementation is only required to support IPv4
    addresses.

OBJECT cnfTopFlowsMatchNhAddressType SYNTAX InetAddressType { ipv4(1) } DESCRIPTION
    An implementation is only required to support IPv4
    addresses.

OBJECT cnfTopFlowsMatchNhAddress SYNTAX InetAddress (SIZE(4)) DESCRIPTION
    An implementation is only required to support IPv4
    addresses.

cnfCacheInfoGroup A collection of objects providing information and configuration of the Netflow cache.

cnfProtocolStatGroup A collection of objects providing statistical information of cache per protocol and port.

cnfExportInfoGroup A collection of objects providing Export information.

cnfExportStatisticsGroup A collection of objects providing statistical information of Export.

cnfExportTemplateGroup A collection of objects providing information about export version 9.

cnfTopFlowsGroup A collection of objects providing information for top flows.

cnfTopFlowsDataGroup1 A collection of objects providing information for top flows.

cnfTopFlowsDataGroup2 A collection of objects providing additional information for Top Flows.

cnfTopFlowsVlanGroup A collection of objects providing VLAN information about the top flows.

cnfTopFlowsControlGroup1 A collection of objects providing the match criteria control information for Top Flows.

cnfTopFlowsControlGroup2 A collection of objects providing the explicit control of the way top flows are generated.